Tag Archives: ir laser

SMSLaser 3-in-1 MFAL announced

You’re tired of hearing me talk about SMSLaser, I know. But let’s face it: I love these guys, I love the HFXC, and I definitely love that they’ve just announced a follow-on device.

No name for this device yet, but let’s talk about the high points:

  • It’s a 3-in-1 MFAL ala the PEQ-15, NGAL, IRIS, etc., with an IR illuminator, IR laser, and visible laser. It omits the white light that was on the HFXC.
  • It uses a center mount. The lasers looks like they will be slightly off-bore, but not a ton.
  • There is, supposedly, a built-in defuser cap.
  • The mode selector, battery compartment, and crane port are all on the sides of the device. This is reminiscent of the BE Meyers DAGIR.
  • It keeps the power level buttons, and centerlines the fire button, but now has a top-mounted slider to control the illuminator focus. Also on top: much bigger zeroing turrets.
  • It is supposedly going to CR123s. In a perfect world, I’d rather have 18350s, but it’s certainly workable.
  • It is still a somewhat sizable device compared to the IRIS or NGAL.
  • It is supposedly more waterproof than the HFXC.
  • They have implied it is coming out next month (July).

All in all, it looks pretty good, and will probably dominate the budget market just like the HFXC did. I’ll certainly be grabbing one as soon as they come out.

RovyVon GL4 Pro Refresh, GS4, and GL5 Pro News (plus GL8 Pro teaser)

Got a few new releases from RovyVon, and they’re pretty cool. An updated GL4 Pro, and even more exciting: the GL5 Pro with the GS4 tapswitch!

This one is going to take some explaining, so hang on tight and click that read more button.

Continue reading RovyVon GL4 Pro Refresh, GS4, and GL5 Pro News (plus GL8 Pro teaser)

RovyVon GL4 Pro Lever Change

If you’re having problems with your RovyVon GL4 Pro not locking as tight to a Picatinny (1913) rail as tightly as it probably should, it’s not just you (assuming you’re using the right lug “key”). The first run of GL4 Pros appears to have had their rail grabber based on the (proprietary) Glock rail. This version of the grabber works really well with Glocks, but is just a teensy bit loose on Picatinny rails. You can sometimes shim it, which is what I did, but this winds up introducing some alignment issues, and is otherwise not a very satisfying solution.

But, good news: RovyVon has a new version of the lever that’s on newer GL4 Pros!

As you can see, the new lever has cut-outs that allow it to clamp MUCH harder. If you own an original GL4 Pro, you can email them for a warranty replacement if it’s causing you demonstrable problems.

As a reminder, the GL4 Pro is my budget go-to recommendation if you need “active IR” capabilities on a pistol. It’s under $300, it has very usable functionality across all its capabilities, and it’s more-or-less compatible with XVL2 holsters (sometimes with minor fitting).

It would also be my recommendation for shorty CCs… but I may have something else you should look at. Stay tuned.

Some thoughts on the Tavor 7

I bought an IWI Tavor 7 with 20″ barrel a few months ago. It was one of those embarrassing “this bid on Gunbroker could never win” moments, but I have to admit, I was sort of happy I did. I was an early adopter of the US version of the Tavor SAR, and it continues to be one of my favorite oddball rifles. I’ve been shooting it a bit lately, and the Tavor 7 feels like an upgraded version of the the original Tavor, and seems like the rifle the X95 should have been.

Continue reading Some thoughts on the Tavor 7

RovyVon Releasing New Versions of the GL4 Pro

Did you see my review of the GL4 Pro and go “yes, but only if it could perform Lasik surgery, too?” Well, RovyVon has you covered now.

The GL4 Pro XL is out for $500 right now. The GL4 Pro FP is out in May for $800. I won’t comment on the legality of these solutions, but will note that the GL4 Pro is more than adequate for most pistol range tasks, especially at night or indoors.